SITRANS LH100
Process Instrumentation
Pressure Transmitter
The SITRANS LH100 series pressure transmitter is a well probe and converts the level-proportional hydrostatic pressure into a standardized signal of 4 to 20 mA. It measures the level in basins, tanks, canals and dams. The SITRANS LH100 is available for different measuring ranges and optionally with explosion protection. The transmitter has a stainless steel housing and a piezoresistive sensor with a ceramic diaphragm.
Catalog Specifications
Benefits
- Easy installation and use due to compact design and corrosion-resistant material
- Safe application due to vent pipe in connection cable to prevent condensate formation
- Long service life due to protection of the measuring diaphragm against external influences by protective cap
Standard measuring set: Transmitter, cable hanger, junction box
Detail
| Accuracy | ≤ 0,3 % |
|---|---|
| Long-term stability | 0,25 % / 12 months |
| Measuring range | 0 – 3 mH2O to 0 – 20 mH2O |
| Housing | 316L stainless steel housing (Ø 23.4 mm), IP68 rated |
| Cable | PE sheathing; Ø 6 mm with vent pipe |
| Cable Length | standard 10, 20, or 30 m, special lengths up to 50 m are possible |
| Certificate / Approvals | Explosion-protected version according to IEC Ex and ATEX |
Range of application
The Sitrans LH100 is used in shipbuilding, water/waste water supply and in unpressurised/open tanks and wells.